PMMA FILB72♂

PMMA FILB72♂PBT-T803TPU-5377（粉）TPV-701-70PBT-GP2156FMPA66-HKC35H2.0TPU-40A12PPC/ABS-TN-7000-PC-PC-122UPOM-GN705PPO-PPX630PC-G-3410HPPO-N190HFPC/ABS-FR3010-POM-KL-004AXDLCP-LX70U30-BTPU-90AE-bbbbb0PBT-3300-2PPO-P155PPO-GFN3-701PBT-5201-X10TPU-AH-650PC-LGS-2330MPBT-3300HPC-101PC-3110GPBT-972CAPOM-S9064TPU-1190APPO-GTX830-1710TPU-192PC-2207TPV-201-68W228PA9T-G1301APC-LS1-6164PBT-310PMMA FILB72♂ PMMA FILB72♂

Furthermore, such as the recent two years, India intercontinental recycling company has produced qualified recycling PET, according to reports, the India state-owned intercontinental recycling company Indian-ownedIntercontinentalRecycling is located in the northern England region of the Skelmersdale device began trial operation in November 2007, according to the plan, the device can recovery and transbbbbation of 30 thousand tons per year of waste plastic bottles. In addition, the device has some equipment for sorting, washing and drying, and the products produced will be hot pot flakes for non food products. Consumers can use this material to package non food products or to separate two layers of edible material as intermediate. In the UK, the market price of regenerated PET bottles for non food products is about 600 pounds per ton.

In addition, Japanese enterprises successfully developed recycled and regenerated PET modifier. It recalled that the container recycling bbbbbb was implemented in April 2000 in Japan. In 2006, the recovery of PET bottles reached 390 thousand tons, reaching only 60% of the recovery rate. The technical problem for recycling and reuse for PET. The two brands of recycled PET modifier, "AR-P-1000" and "AR-P-1100", were successfully developed from Japan to the market. The main characteristics of AR-P recycling regenerative modifier are: (1) no drying treatment is needed. It is very stable at room temperature. It is suitable for all plastic bbbbing and processing equipment. (4) can be coloured arbitrarily. Blends can be added directly. To enhance the impact strength of PET recycled material molding. As AR-P is dispersed in a fine state in the recovery of PET molding materials, the interfacial tension is small under the shear force of the molding process. The viscosity ratio of AR-P to recycled PET molding material is 1, and the dispersion is good, which improves the impact strength of recycled PET molding materials. For example, when adding 5% "AR-P", the notched impact strength is increased from 2KJ/mz to 5.5KJ/m2. In a 10 DEG C low-temperature impact strength increased from 1.BkJ/mz to SkJlm2o and improve the recycling of PET material viscosity, improve the flow perbbbbance of PET melt molding material, suitable for processing complex shape, profile extrusion molding products.

 PMMA FILB72♂PETG-PN200TPU-685APA66-13G15PA6-CX-2500PC-DFL4034PPS-A670PPO-GFN3-701-K(Q)膠 -KR-03PPE-EX1744PBT-B3225PA6-B3WG6POM-C9021GV1/30PA66-A3X2G7TPV-8271-65PC/ABS-FR2000LCP-E471iPPO-PX29261EPDM-510PBT-EXVX1152PC/ABS-LAY100F-K(Q)膠-810LCP-T3B16A1-PC-DPE1810PA66-ST801AWPA6-K-FHG12PBT-325-TPEE-60DPA66-HTN52G30BLASA-778T-UVPOM-FG2010TPU-192XPC-ML-1105PA6V40PPO-GFN2V-960POM-525GR PMMA FILB72♂ PMMA FILB72♂

Pa11 Nylon PA11 density is 1.04g/cm3, the melting point of 185 DEG C, the water absorption rate of 0.1-0.4%, the tensile strength of 47-58MPa. It has the advantages of low water absorption, good oil resistance, low temperature resistance, easy processing and so on.

brief introduction

PMMA FILB72♂PC/ABS-C1100HFTPU-EB95APC/ABS-6200PC/ABS-CY4000-COC-480RPPO-SE1GFN1PA6-B3SPA6-FM-PF-745TPV-8221-85M300LCP-S135POM-ZPRJSPBT-D202G153883PC/ABS-T-2011QTPE-TX-5040DPC/ABS-C7210APC-DX06313PBT-XFR6840GF20-PETG-AN2016PC-2805PC-DFL146PC-AC3830-AHPC-LGK3020PBT-3202-PC-143RPA6-1015GC6PA66-54G43-PBT-5308G30TPV-101-60W261PMMA-VH-067APA46-TW441-TPU-GF50-01PA6-NA102HPA66-CM6021MPBT-420SEOPA66-VF1002PMMA FILB72♂ PMMA FILB72♂

[Chinese name] nylon -11; polyomega aminoeleven

[dissolve] insoluble in general solvents, only soluble in methylene phenol, etc.

[use] a thermoplastic resin. It is used to make oil pipe, film, cable sheath and so on.

[preparation or source] is obtained by condensation of Omega - aminoacid eleven acid.

[Others] are resistant to ordinary acids, alkalis and oxing agents. Low water absorption, good dimensional stability, good wear resistance and oil resistance.

The plasticized modification with N, N- two methyl p-toluene sulfonamide was plasticized PA11, and the mechanical properties of the system were studied. Because N, N- two methyl toluene sulfonamide and PA11 all contain -NH2, both of them have good compatibility. A small amount of plasticizer can greatly improve the impact strength of PA11, while the tensile strength is not greatly damaged, which effectively improves the comprehensive perbbbbance of PA11.。

ABS Main uses

PC/ABS regenerator is an important engineering plastic alloy, which is widely used in automotive, electronic, electrical, office and communication equipment and other fields. Nowadays, in order to meet the special requirements of fire safety in the application field, especially in electronics and electrical products, the flame retardant technology of PC/ABS alloy has become a hot rebbbbbb topic. However, with the progress of science and technology, the requirements for the environmental friendliness of materials are becoming more and more high, and the traditional halogen flame retardancy is becoming more and more harmful.