產品詳情
注明：
一、本產品配有一個阿拉伯數字和英文字母的底盤，可以在戒指的內壁刻上自己的英文名字和日期，例：DZQ 2008 、14K、18K、S925等等。
二、圓盤上面只有字母和數字，所以只能刻英文或數字，不能刻漢字。
產品參數：
產品名稱：戒指內環(huán)刻字機
字體大?。?.5mm 2mm
機身尺寸：長：260mm*寬230mm*高420mm
包裝尺寸：長：330mm*寬310mm*高480mm
機器凈重：5.5kg
包裝后重量：6.7kg
Ring Engraving Machine Double Sided Dial Ring Engraver Tool Standard Letter Block Stamper Ring Engraver Machine for Rings Inner
Introduction
This brand new ring engraver is designed for engraving symbol on the inner side of various rings, it is manual operating, you can enjoy the fun of hand-engraving without spending too much physical strength.
This machine is point-engraving type.
Gear transmission enables the chuck continue to rotate after each character is engraved. Double sides engraving dial allows engraving on almost all kinds of rings with different size and material.
Operation Procedure
1. Put the ring you want to engrave into the chuck and tighten it.
2. Find the character you want to engrave and adjust it just below the needle handle.
3. Slightly depict the character with stylus pen.
4. After finishing engraving, get the ring out.
5. Appreciate your masterpiece,which is b and delicacy engraving.
Item Specifications
Height of each character: 1.5mm-2.0mm
Rotary angle of the jaw: 360 degree
Overall dimension: 480 mm x 310 mm x 330 mm ( 18.9" * 12.2" * 13")
Weight: 6.72 kg
Please Note: Don't put too much force while depicting.
Packing List:
1 x Inside Ring Engraving Machine
1 x Double Sided Dial
1 x User Manual
